I’ve been building speakers for myself and others as well as repairing Quad Electrostatic speakers for nearly twenty years.  A couple of my designs are shown on my website, as well as instructions and descriptions of how to repair the Quad ESLs.  One key tool needed in speaker design and repair is the ability to measure the speakers acoustical response.  I have used  Loudspeaker Lab to measure passive components, driver TS parameters, and speaker impulse response and sweeps.  Lately I’ve been using Fuzzmeasure on my Mac, which is a nice and simple package, and works well.  But nothing works exactly like you like to work except software you write yourself.  I have a complete passive component measuring, Driver TS parameter calculating, and speaker impulse and sweep response measuring suite written in LabView.  I’ll be posting a description of my software suite and lots of screenshots soon.

Regardless of the software used, a good microphone pre-amplifier is needed.  In 2002, I designed a measurement bridge loosely based on the Loudspeaker Lab box.  The controls were designed to match the Loudspeaker Lab box, and my measurement box contains a lot of the same functionality, but in a higher performance, more battery hungry version.  The measurement box contains a low noise wide bandwidth microphone pre-amp, an amplified impedance bridge, and an extra channel of buffering for amplifier compensation when measuring speakers.  In addition, I have a built in reference resistor (0.005%) to calibrate the impedance bridge.

This bridge allows me to measure and match crossover components (caps, resistors and inductors), measure driver Thiele-Small parameters (Delta Mass), and measure speakers; both impulse response (MLS based), and in-room sweeps.  I use this measurement box in conjunction with Panasonic WM-61A electret microphones.

Here is the schematic for my measurement bridge:

And here’s a few pictures of the measurement box itself.  It loves to eat 9V batteries:

Well after owning my Model M keyboard for nearly a decade, I decided that my key-cap cleaning and case wiping wasn’t enough. So I carefully removed the keyboard itself from the keyboard case and cleaned everything I could reach. This isn’t typically blog-worthy, but this is the legendary IBM Model M keyboard; the one true keyboard. So much has been written about this wonderful piece of engineering that I won’t elaborate. Wikipedia does a good job of it: Model M

I love my keyboard, and use it frequently. I do a lot of work on laptops these days and the Apple low profile aluminum keyboard is slowly winning me over with is sweet short throw sweetness. But the tactile feel and sound of typing on a Model M is a thing of beauty.

Sheldon